PPTP Client Auto Reconnect Note 
# Create vpn Connection
pptpsetup --create vpnhk --server x.x.x.x --username vpn-user-name --password vpn-password --encrypt --start
pptpsetup --create vpnlw --server y.y.y.y --username vpn-user-name --password vpn-password --encrypt --start
pptpsetup --create vpnfw --server z.z.z.z --username vpn-user-name --password vpn-password --encrypt --start

# Manual Connect VPN
pon vpnhk updetach
pon vpnlw updetach
pon vpnfw updetach

# Manual Disconnect All VPN
poff -a

# Manual Route Add
route add -net 192.168.90.0 netmask 255.255.255.0 dev ppp0
route del -net 192.168.90.0 netmask 255.255.255.0

# Setup Boot up ppp Auto Connection
/etc/network/interface
auto vpnhk
iface vpnhk inet ppp
provider vpnhk

auto vpnlw
iface vpnlw inet ppp
provider vpnlw

auto vpnhk
iface vpnhk inet ppp
provider vpnlw

# added by pptpsetup
/etc/ppp/chap-secrets
joehome vpnhk "EV2340~9" 192.168.45.40
joehome vpnfw "EV2340~9" 192.168.45.60
joehome vpnlw "EV2340~9" 192.168.45.70

# Auto pptp Re-connection modify Sample
/etc/ppp/peers/vpnfw
# written by pptpsetup
pty "pptp 119.145.34.2 --nolaunchpppd"
lock
noauth
nobsdcomp
nodeflate
name joehome
remotename vpnfw
ipparam vpnfw
require-mppe-128
maxfail 0
persist

# Install quagga Dynamic Route tools
apt-get install quagga

# Dynamic Route Configuration, Need install quagga
/etc/quagga/daemons
zebra=yes
bgpd=no
ospfd=no
ospf6d=no
ripd=yes
ripngd=no
isisd=no
babeld=no

# Dynamic Route Table setting, Need install quagga
/etc/quagga/zebra.conf
hostname AnyName
password YourPassword
enable password YourPassword
ip route 192.168.1.0/24 192.168.40.1
ip route 192.168.40.0/24 192.168.40.1
ip route 192.168.60.0/24 192.168.60.1
ip route 192.168.70.0/24 192.168.70.1
ip route 192.168.90.0/24 192.168.40.1

# Dynamic Route Restart
/etc/init.d/quagga restart


[ 發表回應 ] ( 3預覽 )   |  常註連結  |   ( 2.7 / 79 )

<前一頁 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 下一頁> >>